[Error Code] CANON IR2520

[zaza]

hello we have error code **E000808-0000 in canon ir2520 ..please help

[teckat]

Re: CANON IR2520

hello we have error code **E000808-0000 in canon ir2520 ..please help

were u working on fixing unit ??
may be bad wall voltage

one of the connectors for the fixing assembly not being plugged in when the unit is powered on.
check them> then unplug the machine for about 10 minutes. see if clears

E808 0000 Fixing drive circuit failure

• The heater does not turn on.
• A fixing drive motor failure was detected.
• Check the connector of the fixing film unit.
• Replace the fixing film unit.
• Replace the fixing drive motor.
• Replace the DC controller PCB.
• Replace the power supply PCB.

[zaza]

Re: CANON IR2520

were u working on fixing unit ??
may be bad wall voltage

one of the connectors for the fixing assembly not being plugged in when the unit is powered on.
check them> then unplug the machine for about 10 minutes. see if clears

E808 0000 Fixing drive circuit failure

• The heater does not turn on.
• A fixing drive motor failure was detected.
• Check the connector of the fixing film unit.
• Replace the fixing film unit.
• Replace the fixing drive motor.
• Replace the DC controller PCB.
• Replace the power supply PCB.

thx friend nick ..a good reply from yourself by the costumer was said me l buying this new machine and l buying the new adf ....firstly the copier function very good but if he placed this new adf at this machine this error code appeared there ..in your opinion if we put them the new adf we should be uploaded a new driver ?

[teckat]

Re: CANON IR2520

thx friend nick ..a good reply from yourself by the costumer was said me l buying this new machine and l buying the new adf ....firstly the copier function very good but if he placed this new adf at this machine this error code appeared there ..in your opinion if we put them the new adf we should be uploaded a new driver ?

u mean when he plugs the DADF into printer ,it codes out to e808 ,

what does DADF have to do with a driver

is this a new or refurb ?

[zaza]

Re: CANON IR2520

u mean when he plugs the DADF into printer ,it codes out to e808 ,

what does DADF have to do with a driver

is this a new or refurb ?

so the costumer was said me . he buying this new adf but he not found any dvd driver ..what can do it ?

[teckat]

Re: CANON IR2520

so the costumer was said me . he buying this new adf but he not found any dvd driver ..what can do it ?

do not understand

[Rachid.Akli]

Re: CANON IR2520

thx friend nick ..a good reply from yourself by the costumer was said me l buying this new machine and l buying the new adf ....firstly the copier function very good but if he placed this new adf at this machine this error code appeared there ..in your opinion if we put them the new adf we should be uploaded a new driver ?

The DADF installation doesn't need any driver or system software. It is just a hardware installation. Have you seen the machine or you're just reporting what has said your custmer?

Rachid.

[zaza]

Re: CANON IR2520

The DADF installation doesn't need any driver or system software. It is just a hardware installation. Have you seen the machine or you're just reporting what has said your custmer?

Rachid.

hey men this costumer was buying this machine from capital Alger ..in some workshop in cheragua ....it's news if this costumer was function this ir2520 it have this error code ...l think it is your personal workshop's or you knowing there cause you live in capital of Algeria try found this workshop maybe you can controlled her machine ....good lucky .

[DAG COPIERS & COMPUTERS]

Re: CANON IR2520

do not understand

Hi zaza, try to post the question in French. I think Rachid Akli can help translate in English for the forum, or we can 'Google Translate'. It will make the members help you better.

[northernlife]

Re: CANON IR2520

Je suis francais si ca l'aide

[Rachid.Akli]

Re: CANON IR2520

hey men this costumer was buying this machine from capital Alger ..in some workshop in cheragua ....it's news if this costumer was function this ir2520 it have this error code ...l think it is your personal workshop's or you knowing there cause you live in capital of Algeria try found this workshop maybe you can controlled her machine ....good lucky .

It's a mess my friend!!!!!!

Rachid

[Billy]

Re: CANON IR2520

Je suis francais si ca l'aide