Have this iRA4025 that has approximately 55K copies on it. It is lite on the front edge of the page. It is almost like there is something on the mirrors or slit glass (in some models). On "The Grid", the only thing that I found was the DV unit and the correction was to replace it. I am leery of this as the work environment it is in has a lot of fine oil in the atmosphere. I have cleaned all the mirrors and all the glass that I could find bu no joy. It does this when both printing and copying from the glass and DF. Any ideas would be helpful because I just don't want to replace the DV unit if it is not necessary.
Thanks in advance.
Bill
Thanks in advance.
Bill
Comment