error 0051-0000

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • jiongpao
    replied
    Re: error 0051-0000

    its usually the small gear broken that attached on registration motor. If you see it closely theres a crack on following gear but it doesnt sell with only gear, so you must get Horizontal Registration Motor

    Leave a comment:


  • teckat
    replied
    Re: error 0051-0000

    Originally posted by anand8620
    Hi All

    I am getting Error 0051-0000 in my Cannon IR3300. Please help me to overcome this problem.

    With Regards
    ANAND
    ============/

    Inspect the contact pins in at intermediate connector J3040-2.
    This is the signal line for M3, the horizontal registration motor./ see if bent or damaged ??

    Inspect area for jammed/stuck paper

    code refers to a problem with the Horizontal Home Position Sensor, or the Horizontal Registration Motor M3.

    The gear and motor are illustrated below:

    Leave a comment:


  • anand8620
    started a topic [Error Code] error 0051-0000

    error 0051-0000

    Hi All

    I am getting Error 0051-0000 in my Cannon IR3300. Please help me to overcome this problem.

    With Regards
    ANAND
Working...