help ir400 sys software corrupt file error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sham
    • Jul 2025

    #1

    help ir400 sys software corrupt file error

    please help, i am trying to install ir400 system software 2.1 but iam getting corrupt file error
    i tried changing ram also but same problem
    thanks advance
  • vandezo
    I don't know

    100+ Posts
    • Nov 2007
    • 161

    #2
    Corrupt file..
    it's sound like a harddisk bad..
    Or there is a cable LPT1 bad connect..
    1.try to format the disk, then reinstall system software..
    2.try to install in another PC..

    Comment

    • sham

      #3
      thanks
      I tried three different computer but same problem
      parallel cable is new
      i formated hdd many times with full format
      i clone hdd with ps/pcl then it say software not authories
      so i am trying pcl only
      any other help

      Comment

      • vandezo
        I don't know

        100+ Posts
        • Nov 2007
        • 161

        #4
        Originally posted by sham
        thanks
        I tried three different computer but same problem
        parallel cable is new
        i formated hdd many times with full format
        i clone hdd with ps/pcl then it say software not authories
        so i am trying pcl only
        any other help
        many time i found this same problem on my installations.
        i try change my printer board with the working board.. and then i instaall on it..its working, after that.. i put the harddisk on the board before.. its working whell..
        so.. maybe.. the board, have samething problem..
        try to change the board, if you have another board print..
        have a try..
        Last edited by vandezo; 05-07-2008, 03:20 AM.

        Comment

        • sham

          #5
          thanks
          I tried changing the printer board also
          is their any way to copy pcl file to hdd
          i also tried different cable but with that it say functionality error

          Comment

          • vandezo
            I don't know

            100+ Posts
            • Nov 2007
            • 161

            #6
            are you instal with PDL downloader? or just copy with dos prompt?
            reinstall the PDL downloader..
            can't be clonning with software ghost or anything, because there's no partition on it..

            "functionality error" sounds like bad boards print.
            have a try..
            i waiting 4 good news

            Comment

            • sham

              #7
              I tried both with pdl 3.14 & dos prompt but same error
              i also tried with pdl 2.03 but same error

              Comment

              • vandezo
                I don't know

                100+ Posts
                • Nov 2007
                • 161

                #8
                Ok... ok..
                if sure your software & file H1k1_v2.0.um in good conditions..
                try in another boards..

                Comment

                • sham

                  #9
                  thanks
                  I don't have ver 2.0
                  i have only ver 2.1
                  where i download ver 2.0

                  Comment

                  • vandezo
                    I don't know

                    100+ Posts
                    • Nov 2007
                    • 161

                    #10
                    Originally posted by sham
                    thanks
                    I don't have ver 2.0
                    i have only ver 2.1
                    where i download ver 2.0
                    no no. no... i mean ver 2.1.. i use it to..
                    the latest versions is ver 2.1

                    Comment

                    • sham

                      #11
                      thanks sir
                      the problem was parallel cable. I change the cable with old one & it working fine
                      I don't know whats the problem with new cable because it is working fine while printing

                      Comment

                      • thenappan
                        Technician
                        • Mar 2009
                        • 10

                        #12
                        software pls

                        Originally posted by sham
                        thanks sir
                        the problem was parallel cable. I change the cable with old one & it working fine
                        I don't know whats the problem with new cable because it is working fine while printing

                        can i hava pcl system software for ir 400 and ir 200

                        pls help me how to install

                        Comment

                        Working...