help ir400 sys software corrupt file error

[Guest]

please help, i am trying to install ir400 system software 2.1 but iam getting corrupt file error
i tried changing ram also but same problem
thanks advance

[vandezo]

Corrupt file..
it's sound like a harddisk bad..
Or there is a cable LPT1 bad connect..
1.try to format the disk, then reinstall system software..
2.try to install in another PC..

[sham]

thanks
I tried three different computer but same problem
parallel cable is new
i formated hdd many times with full format
i clone hdd with ps/pcl then it say software not authories
so i am trying pcl only
any other help

[vandezo]

thanks
I tried three different computer but same problem
parallel cable is new
i formated hdd many times with full format
i clone hdd with ps/pcl then it say software not authories
so i am trying pcl only
any other help

many time i found this same problem on my installations.
i try change my printer board with the working board.. and then i instaall on it..its working, after that.. i put the harddisk on the board before.. its working whell..
so.. maybe.. the board, have samething problem..
try to change the board, if you have another board print..
have a try..

[sham]

thanks
I tried changing the printer board also
is their any way to copy pcl file to hdd
i also tried different cable but with that it say functionality error

[vandezo]

are you instal with PDL downloader? or just copy with dos prompt?
reinstall the PDL downloader..
can't be clonning with software ghost or anything, because there's no partition on it..

"functionality error" sounds like bad boards print.
have a try..
i waiting 4 good news

[sham]

I tried both with pdl 3.14 & dos prompt but same error
i also tried with pdl 2.03 but same error

[vandezo]

Ok... ok..
if sure your software & file H1k1_v2.0.um in good conditions..
try in another boards..

[sham]

thanks
I don't have ver 2.0
i have only ver 2.1
where i download ver 2.0

[vandezo]

thanks
I don't have ver 2.0
i have only ver 2.1
where i download ver 2.0

no no. no... i mean ver 2.1.. i use it to..
the latest versions is ver 2.1

[sham]

thanks sir
the problem was parallel cable. I change the cable with old one & it working fine
I don't know whats the problem with new cable because it is working fine while printing

[thenappan]

software pls

thanks sir
the problem was parallel cable. I change the cable with old one & it working fine
I don't know whats the problem with new cable because it is working fine while printing

can i hava pcl system software for ir 400 and ir 200

pls help me how to install