Ir 7200 printer details enquary

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mohd sadiq
    Technician
    • Jul 2013
    • 25
    #1

    Ir 7200 printer details enquary

    dear senior technicians, and other friends, this is my first visit and hello to every body. i need a help to convert basic copier of IR7200 as a printer. i replaced printer boot rom FG6-8855 Ver .23.40 N and IR600 ethernet pcb. but it can't work as printer. i also note that ther is no the word BOARD in display, when i go to service mode. from service, manual i came to know that there should be two more boards -LIPS PCB and RAISER PCB are needed. what size memory i need to fix. main controler part number is FG6-7278. CAN ANY ONE GUIDE ME TO FIX THIS PROBLEM? THANKS TO ALL!
    Tags: boot, copier, display, memory, part number, printer, service, tech, work
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Ir 7200 printer details enquary

      Originally posted by mohd sadiq
      dear senior technicians, and other friends, this is my first visit and hello to every body. i need a help to convert basic copier of IR7200 as a printer. i replaced printer boot rom FG6-8855 Ver .23.40 N and IR600 ethernet pcb. but it can't work as printer. i also note that ther is no the word BOARD in display, when i go to service mode. from service, manual i came to know that there should be two more boards -LIPS PCB and RAISER PCB are needed. what size memory i need to fix. main controler part number is FG6-7278. CAN ANY ONE GUIDE ME TO FIX THIS PROBLEM? THANKS TO ALL!
      ---------------------------------------------------------
      Network Multi-PDL Printer Kit -B3--------------------------

      U need to load in the iR7200N Firmware > using SST

      Memory=Uses Main unit DIMM (192 MB)
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • mohd sadiq
          Technician
          • Jul 2013
          • 25
          #3
          Re: Ir 7200 printer details enquary

          thank you mr .teckat! i down load the system software N version as you told . now printing problem solved. again thank you sir.

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: Ir 7200 printer details enquary

              Originally posted by mohd sadiq
              thank you mr .teckat! i down load the system software N version as you told . now printing problem solved. again thank you sir.
              ================

              COLOR HAND.jpgwelcome/ good work
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Previous template Next
                Working...