Canon IR 6000

[Canuck]

Re: Canon IR 6000

Just when printing......update the driver,try a different driver....using Pcl,PS or UFR? In the PS driver,check print as an image and see if has any effect on it

[ar6565]

Re: Canon IR 6000

Thanks all.
When I changed the Drum Cleaning Blade the printing are now very good and there is no problem.
Thanks all again.

[teckat]

Re: Canon IR 6000

Thanks all.
When I changed the Drum Cleaning Blade the printing are now very good and there is no problem.
Thanks all again.

--------

a cleaning blade affects all copies & prints= u probably had an OPTICAL ILLUSION

Take the test
lines are same length






is the orange dot the same size (use a ruler on all)

[canonbundy]

Re: Canon IR 6000

Thanks all.
When I changed the Drum Cleaning Blade the printing are now very good and there is no problem.
Thanks all again.

Hmmmm, seems I recall saying that in my 1st POST.

[Canuck]

Re: Canon IR 6000

Mis-information is worse than none. Shoulda flipped the cleaner blade as soon as you saw fine lines... Been a while since i opened up a 5000. Have seen the primary curtain drag on the drum and cause fine lines. Can't remember if 5000 has one.fyi

[ar6565]

Re: Canon IR 6000

Hmmmm, seems I recall saying that in my 1st POST.

Many thanks to you and to all