IR105 Network Assistance

[Guest]

Greetings,

We've had a IR105 for quite some time now and have been using it as a stand alone machine. We'd like to begin printing to it via the network. however, we're faced with the following problems.

1. We assign a static IP address to the machine (192.168.16.136)
2. we're able to ping the printer (as well as ping workstations from the printer)
3. we install the printer (using the PCL 6 driver win7)

however, none of the print jobs reach the printer.

Please Help!

Thanks!

[SCREWTAPE]

Re: IR105 Network Assistance

Do you know if it has a printer kit. Needs a printer kit if you want to print via network.

[bigtone559]

Re: IR105 Network Assistance

Do you know if it has a printer kit. Needs a printer kit if you want to print via network.

TBH i'm not sure. Would i be able to ping the machine and install the printer (windows communicates with the printer) without the print kit? Could you suggest a method to check?

thanks,

[SCREWTAPE]

Re: IR105 Network Assistance

TBH i'm not sure. Would i be able to ping the machine and install the printer (windows communicates with the printer) without the print kit? Could you suggest a method to check?

thanks,

Give me a minute.

[SCREWTAPE]

Re: IR105 Network Assistance

You can ping or setup a printer with all the configurations. But with out the printer kit, nothing is coming out.

Most models within the counter check -Button there is a device configuration tab.

Within here should find something pertaining to a printer kit.

[SCREWTAPE]

Re: IR105 Network Assistance

And also with service mode

/additional functions/2&8/additional functions.

Copier/version/

Bootrom should say (N)

iR-105 Hardware Page

DC-CON	10.06
R-CON	10.01
ADF	7.01
K1N/K2N/K3N	IC 106 24.01, IC 125 22.01
K1/K2/K3	IC 106 04.03, IC125 04.01
Saddle	04.05
MN-CONT (System)	71.01
BOOT-ROM	13.33N
RUI	70.20
Language	71.01

[bigtone559]

Re: IR105 Network Assistance

And also with service mode

/additional functions/2&8/additional functions.

Copier/version/

Bootrom should say (N)

iR-105 Hardware Page

DC-CON	10.06
R-CON	10.01
ADF	7.01
K1N/K2N/K3N	IC 106 24.01, IC 125 22.01
K1/K2/K3	IC 106 04.03, IC125 04.01
Saddle	04.05
MN-CONT (System)	71.01
BOOT-ROM	13.33N
RUI	70.20
Language	71.01

By the way SCREWTAPE thanks for the replies. I checked our system and it says 26.44C. Does this confirm that the printer kit isn't installed?

[SCREWTAPE]

Re: IR105 Network Assistance

Yea sorry you do not have a N chip.

C bootrom / Standalone

i can probably check if there available for you.

[teckat]

Re: IR105 Network Assistance

Greetings,

We've had a IR105 for quite some time now and have been using it as a stand alone machine. We'd like to begin printing to it via the network. however, we're faced with the following problems.

1. We assign a static IP address to the machine (192.168.16.136)
2. we're able to ping the printer (as well as ping workstations from the printer)
3. we install the printer (using the PCL 6 driver win7)

however, none of the print jobs reach the printer.

Please Help!

Thanks!

--------------------------------------------------

Network Boot DIMM===========need Kit
imageRUNNER 105 = Multi PDL PRINTER KIT B4/5= 6935-A012-AA