[Jamming] CANON IRC3220

[sniper2g8]

I change the upper roller but still jam when printing on a4 but it comes out on a3 sheet please help

[northernlife]

Re: CANON IRC3220

Upper roller?

[teckat]

Re: CANON IRC3220

I change the upper roller but still jam when printing on a4 but it comes out on a3 sheet please help

mind-reader real.jpg


????????????????????????? i can see u/ but i can't see what roller

[Canuck]

Re: CANON IRC3220

[ATTACH=CONFIG]21948[/ATTACH]


????????????????????????? i can see u/ but i can't see what roller

LMAO

[sniper2g8]

Re: CANON IRC3220

LMAO

I mean the upper fuser roller get thorn and I changed it after when I print on A3 sheet it comes out perfect but I never get this on A4 sheet . The A4 shest keeps Jamming in the fusser should I change the lower fuser roller too. Please help.

[SAZ911]

Re: CANON IRC3220

I mean the upper fuser roller get thorn and I changed it after when I print on A3 sheet it comes out perfect but I never get this on A4 sheet . The A4 shest keeps Jamming in the fusser should I change the lower fuser roller too. Please help.

hi

I would recommend that you replace the pressure roller every time you replace the fixing roller....

when printing A4 have you tried both Cassette's?, does it jam every time or intermittently?, whats your jam code?,

[Canon.Tech]

Re: CANON IRC3220

Have you got the NIP presure right? as you would have had to undo the NIP screws to replace the fixing roller.

[canonbundy]

Re: CANON IRC3220

I mean the upper fuser roller get thorn and I changed it after when I print on A3 sheet it comes out perfect but I never get this on A4 sheet . The A4 shest keeps Jamming in the fusser should I change the lower fuser roller too. Please help.

Check the Dial on the front of the Cassette, ensure it shows correct Size & Orientation for the Paper in it.

[teckat]

Re: CANON IRC3220

NIP WIDTH.JPG
NIP.JPG
F21.JPG

[sniper2g8]

Re: CANON IRC3220

hi

I would recommend that you replace the pressure roller every time you replace the fixing roller....

when printing A4 have you tried both Cassette's?, does it jam every time or intermittently?, whats your jam code?,

The JAM CODE is 0207

[teckat]

Re: CANON IRC3220

The JAM CODE is 0207

--------;

0207 =Jam Code: Fixing delivery stationary jam


Inspect / Replace the internal delivery roller with a new one (FB6-4862-000).

roller.JPG

[teckat]

Re: CANON IRC3220

The JAM CODE is 0207

--------;

0207 =Jam Code: Fixing delivery stationary jam


Inspect / Replace the internal delivery roller with a new one (FB6-4862-000).

This roller becomes very soft overtime from internal heat/ test & squeeze > because on visual looking it will appear ok !

Because roller is soft- it will delay and not push/drive paper out past fuser rollers

Removing the Internal Delivery Roller
1) Slide out the fixing feeder unit.
2) Open the fixing feeder unit cover.
3) Remove the E-ring and the bushing [2]at the front; then, remove the gear [3]and the bushing [4] at the rear.
INTERNAL DEL ROLL.JPG
INTERNAL DEL ROLL2.JPG
4) Free the internal delivery roller [1] from the cut-off of the frame at the front; then, detach it.


roller.JPG