Canon IR C3200 rip board problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • regalcopy
    Technician

    50+ Posts
    • Oct 2007
    • 58
    #1

    Canon IR C3200 rip board problem

    IR C3200's rip board is faulty & I have removed it. I want to print to the machine without rip card. How can I do this?
    Tags: c3200, canon, concern, imagepass, not printing, operated, rip, secondary, service modes, stuck, symptoms, tested, win xp
    • lkrsardis
      Trusted Tech

      250+ Posts
      • Dec 2007
      • 316
      #2
      irc3200 printing

      First of all what are the symptoms of the C1 imagepass that makes you want to replace it? You will need the Color Network Multi-pdl Printer Kit A-1, part# 7777A001AA.., and then system software to support it.
      Like the United States Postal Service It's a miracle it works!

        Comment

        • regalcopy
          Technician

          50+ Posts
          • Oct 2007
          • 58
          #3
          Ir C3200 Not Printing

          Thankz For Reply
          I Don't Have C1 Fiery, The Fiery & Rip Are Inbuilt. It Was Ok But Problem Started-machine Stopped Scanning & Printing. When Sent A Print It Was Received But Didn't Print. I Couldn't Cancel The Print As Well.
          I Then Removed The Rip Card & Printer Board(holding Rip Board) From The Machine, Cleaned It Did Some Soldering, Then Machine Did Scan But No Print.
          I Was Stuck For 2 Months Like This Without Help. Then I Tried Again, In Service Tool Level2 Under Option Body I Changed Some Value To 1 From 0.

          Now Machine Is Not Booting And When I Turn Machine On It Shows Wait & I Am Stuck Again.
          Plz Tell Me What Is The Problem.
          Regards

            Comment

            • alex@wocltd.com
              Trusted Tech

              250+ Posts
              • Nov 2007
              • 430
              #4
              whoa-well just do this....

              guys this exactly what i mean....

              but for the sake of freedom

              Mr.customer whatever you have doing i now need to replace bootrom(conrolled part) which may take some time and update system f/w and if your sure you did have rip will need to swap 'c' boot rom for 'n' rom and also swap i/f board for surf board to allow network printing in the interim also need to change int face mode and if stuck with c1 rip that latest f/w is on etc etc

                Comment

                • regalcopy
                  Technician

                  50+ Posts
                  • Oct 2007
                  • 58
                  #5
                  Ir C3200 Doesn't Come Out Of Wait

                  Thanks For The Concern & Reply

                  I Have 6.06 N Boot Room It Is Not 'c', Which I Found In My Machine From Analog Function So I Think Boot Rom Is Ok, If Not Pls Tell Me.

                  I Have Taken The Hard Disk Out And Now I Have Tested It On My Win Xp Operated Pc. The Hdd Is Not Detecting (primary / Secondary Both Drives Tried).

                  Now What Do I Do. Plz Tell Me.

                  WHEN MY MACHINE IS NOT COMING OUT OF WAIT HOW DO I ENTER THE SERVICE MODES.

                    Comment

                    • regalcopy
                      Technician

                      50+ Posts
                      • Oct 2007
                      • 58
                      #6
                      Canon iR C3200 not giving print

                      I want to know what is Color Network Multi-pdl Printer Kit A-1, part# 7777A001AA for printing to my 3200. My machine is scanning fine.

                      Is Printer Surf Board same as above kit. I have removed it & surf board written on the board.

                      Is it same as Color Network Multi-pdl Printer Kit A-1, part# 7777A001AA

                      Please guide me.

                      Thanks

                        Comment

                        Previous template Next
                        Working...