Canon IR Adv C5051 Color Streaking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • IkeW0491
    Trusted Tech

    100+ Posts
    • Oct 2013
    • 172

    #1

    Canon IR Adv C5051 Color Streaking

    Hi all,

    I have a canon IR Adv C5051 that is having issues with both Cyan and Yellow streaks along the top edge of the paper.

    I have already taken out the ITB and cleaned it good, vacuumed the Cleaning blade out and the inside of the machine, also they just installed a brand new Waste toner bottle in machine day before yesterday.

    Also ran the "clean inside machine" from maintenance.

    Still having issue,

    What other steps could I take to resolve this.

    Thanks in advance.

    IKE
    Last edited by IkeW0491; 10-18-2013, 11:33 AM. Reason: Clarification
  • dickiebob
    Technician

    50+ Posts
    • Sep 2011
    • 66

    #2
    Re: Canon IR Adv C5051 Color Streaking

    It will be either the drum units or developer units.

    Comment

    • IkeW0491
      Trusted Tech

      100+ Posts
      • Oct 2013
      • 172

      #3
      Re: Canon IR Adv C5051 Color Streaking

      Thanks for the reply.

      Wonder why there is no mention of this in the Service Manual??

      At least not the one I have available.

      Thanks again!!

      Comment

      • northernlife
        Senior Tech

        500+ Posts
        • Sep 2011
        • 847

        #4
        Re: Canon IR Adv C5051 Color Streaking

        There's numerous tech bulletins including some posted by our saviour teckat on the common issues with this. I believe there is a CQ troubleshooting in the service manual, however the service manual expects that the tech's who use it are trained by canon. It is what it is. Try drums first if not I've seen the dev's get caked on the mag roller, but most certainly the drums.

        Comment

        • IkeW0491
          Trusted Tech

          100+ Posts
          • Oct 2013
          • 172

          #5
          Re: Canon IR Adv C5051 Color Streaking

          Hi Northern

          What I meant earlier was that there is No mention of color streaking in the service manual under troubleshooting or errors.

          I figured it was one or the other, ended up being Cyan and Yellow Drums,

          changed them out and there is no further streaking.

          Thanks again for the help!!!

          Comment

          Working...