Canon C3220 Offset image

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • repairman
    Technician
    • Oct 2013
    • 13

    #16
    Re: Canon C3220 Offset image

    update on c3200 offset.

    with many of the checks and resets done we now have a smaller offset and lighter as well.

    The c2 did not allow us to run calibration. would not read anything we put on the glass. I am getting the firmware to reload and try that again.

    In scan/copy mode text quality it is non existent. In graphics mode offset present.
    sending print jobs in text mode is very light but evident.

    Comment

    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083

      #17
      Re: Canon C3220 Offset image

      Originally posted by repairman
      update on c3200 offset.

      with many of the checks and resets done we now have a smaller offset and lighter as well.

      The c2 did not allow us to run calibration. would not read anything we put on the glass. I am getting the firmware to reload and try that again.

      In scan/copy mode text quality it is non existent. In graphics mode offset present.
      sending print jobs in text mode is very light but evident.
      -------------------------------

      if your calibration page color block alignment is offset / printer will not calibrate

      this goes for Printer Auto Cal & Fiery Cal

      the ITB needs to be removed and inspected as well as the Lasers need to be aligned to their home position
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

      Comment

      • repairman
        Technician
        • Oct 2013
        • 13

        #18
        Re: Canon C3220 Offset image

        got it. the copier is getting replaced with a loaner. Due to the lack of time in the office to do all checks and adj. we are looking forward to having it inshop. The customer has no patience as the existing service company has been at this for 2 months before we came in. to be continued

        Comment

        Working...