[Misc] ir 2530

[akm]

Dear /Copy TechTeam,

First of all i want to thanks your team for previous help. i face a problem that the ir2530 do not make 'auto detect' when i

make a copy from copy board glass i wantv your help




thanks
akm

[teckat]

Re: ir 2530

Dear /Copy TechTeam,

First of all i want to thanks your team for previous help. i face a problem that the ir2530 do not make 'auto detect' when i

make a copy from copy board glass i wantv your help




thanks
akm

------------------------------------------------
In service mode confirm SENS CNF is 1.
Service Mode>SCAN>SCAN READER>OPTION>BODY>SENS CNF = 1
Power cycle machine.

Then Confirm the following settings are set correctly in service mode.

SM>SCAN>SCAN Reader>Option>Body>SZDT-SW = 1
SM>SCAN>SCANReader>Option>Body>SENS-CNF = 1




U mean original size identification of document does not take place

REFERENCE for 2530/2525/2520 READER

Copy board glass is not detecting the correct paper size.


The copy board cover is closed at an angle of more than 5 deg but less than 30 deg,
The Original sensor Turns on and original size identification is performed.

To resolved the issue, re-seat connection on the Open / Closed sensors and Adjust the sensor Mount.

S32 Copy Board Cover Open/Closed, Ends original size identification with the copy board cover at 5 deg

S33 Copy Board Cover Open/Closed, Detects the copyboard cover open/close. Starts original size identification with the copy board cover
at 30 deg.
S21 Copy Board Cover Open/Closed, Ends original size identification with the copy board cover at 5 deg
S26 Copyboard Cover Open/Closed, Detects the copyboard cover open/close. Starts original size identification with the copy board cover at 30 deg.