Canon ir5870c

[Apach]

Hello,

I'm just curious. When the copier starts to work, the first 10 pages are clean and then appears grayish trail.
Always in the same place, so that when you put A4R no trace. Whether it comes to drum cleaner or cleaner belt?
I ask because I currently have only cleaner for belt and a new belt. If the drum cleaner then I must ordered it before replacing the belt and rollers. Thanks on advice.

gray.jpg

[teckat]

Re: Canon ir5870c

Hello,

I'm just curious. When the copier starts to work, the first 10 pages are clean and then appears grayish trail.
Always in the same place, so that when you put A4R no trace. Whether it comes to drum cleaner or cleaner belt?
I ask because I currently have only cleaner for belt and a new belt. If the drum cleaner then I must ordered it before replacing the belt and rollers. Thanks on advice.

[ATTACH=CONFIG]22870[/ATTACH]

image from save will not open/ site issue

link image from html site

[Apach]

Re: Canon ir5870c

image from save will not open/ site issue

link image from html site

Beneath the bold text is as light gray line width of about 2-3cm.


http://www.4shared.com/office/HKe_bWpd/Gray.html

[teckat]

Re: Canon ir5870c

Beneath the bold text is as light gray line width of about 2-3cm.


http://www.4shared.com/office/HKe_bWpd/Gray.html

u mean that wavy gray streak -----is that on trail edge ?

is this on glass copies only

[Apach]

Re: Canon ir5870c

Approximately 2 cm from the edge ... does not matter whether the glass copy, single or both side print or copy .... All we seem to black developer felt at that point.

[teckat]

Re: Canon ir5870c

Approximately 2 cm from the edge ... does not matter whether the glass copy, single or both side print or copy .... All we seem to black developer felt at that point.

is the gray image a constant wave pattern

[Apach]

Re: Canon ir5870c

Yes. Each morning first 10-20 pages is clean then starts. On secundary transfer roller I see toner on same place.