If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Help! All of my Advanced 5000 series are having problems with poor transfer on the second side only with heavy stocks. The problem occurs on the non-op side of the machine. New transfer rollers have been installed.
Help! All of my Advanced 5000 series are having problems with poor transfer on the second side only with heavy stocks. The problem occurs on the non-op side of the machine. New transfer rollers have been installed.
-------------------------------------
format the hard drive then reload the software
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment