irc3480 turn off auto recieve

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jerrygbs
    Trusted Tech
    • Dec 2008
    • 193

    #1

    irc3480 turn off auto recieve

    Can auto receive be turned off? I cant find it anywhere.
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: irc3480 turn off auto recieve

    Originally posted by Jerrygbs
    Can auto receive be turned off? I cant find it anywhere.


    set the fax ring count to prohibit auto fax reception

    Facsimile modems are generally expected to auto-answer after two rings.
    If the modem answers within thirty seconds (approximately 4.5 rings), auto-reception should occur.

    You can effectively disable auto reception by setting the ring count to a value much higher than 4 (for example, 25; max. 99).
    No sending unit is generally programmed to wait this long. Also, some phone systems will not allow you to wait on-line that long without generating a warning message. To set the number of rings see the following:


    For fax-enabled imageRunners
    -Enter Service Mode on the device then select Fax to enter the Fax Service Mode.


    For stand-alone fax units
    -Enter the Fax Service Mode.

    Service Modes for various models
    RX
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • Jerrygbs
      Trusted Tech
      • Dec 2008
      • 193

      #3
      Re: irc3480 turn off auto recieve

      Teckat you were a life saver as usual thanks

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: irc3480 turn off auto recieve

        Originally posted by Jerrygbs
        Teckat you were a life saver as usual thanks
        HatTip_2.jpg
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        Working...