Customer has a Canon IRC1022i - Just put in new OEM cartridge, now it says Black Toner Not Set Properly......any ideas? Not very familiar with this model.
-
-
Re: irc1022i, black toner not set properly
Not sure if this helps but Canon had a problem with Cartridges having a broken pressure spring. They corrected that problem but I had
to modify a couple of them. A tab breaks off that holds that spring. I secured the spring with a screw that is near that spot. These
were cartridges that were right out of the box. -
Re: irc1022i, black toner not set properly
=====================================
The machine detects the absence/presence of the cartridges by the load applied to the drum motors.
If no or very little resistance is detected> That message could pop up
Check the Left and Right Toner Lock Levers. If one or both of the levers are broken, replace them.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment
Comment