Wifi Connection

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jiongpao
    Trusted Tech
    • May 2009
    • 413
    #1

    Wifi Connection

    Hi, one of my customer is requesting the B/W copier machine that come with wifi connection so that they can connect via wifi and currently they are renting IR7200.
    i surveyed some of the information that there is a wifi adapter for canon copier machine, canon wireless network interface adapter NB-W1 9599A004[AA].
    If i get this device can it be use in one of these machines - IR7200, IR105, IR8070, IR7086, IR7105, IR5000, IR5055. Or it only work with IRAdvance 6xxx and 8xxx series?

    Please I need some advise and information for copier + wifi
    Tags: None
    • vamoursly
      Trusted Tech

      250+ Posts
      • Sep 2011
      • 273
      #2

        Comment

        • northernlife
          Senior Tech

          500+ Posts
          • Sep 2011
          • 847
          #3
          Re: Wifi Connection

          Just go wireless bridge so that you have direct connectivity from the clients to the printer. Anything that converts an rj45 connection to wifi will do.

            Comment

            • alex@wocltd.com
              Trusted Tech

              250+ Posts
              • Nov 2007
              • 430
              #4
              Re: Wifi Connection

              these work and are a doddle to set up.....

              Error page | eBay
              http://www.ebay.co.uk/itm/300Mbps-Wireless-N-802-11-AP-Wifi-Range-Router-Repeater-Extender-Booster-UK-Plug/300734843532?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D4273665481442909707%26pid%3D100011%26prg%3D1005%26rk%3D2%26rkt%3D5%26sd%3D251400182861%26

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22997
                  #5
                  Re: Wifi Connection

                  Linksys Support - The page you are looking for doesn't exist (404)
                  http://support.linksys.com/en-us/support/bridges/wet610n


                  Cisco WET610.png

                  I've installed a bunch of these without problems. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • Rakesh
                      Service Manager

                      50+ Posts
                      • May 2012
                      • 72
                      #6
                      Re: Wifi Connection

                      Originally posted by blackcat4866
                      http://support.linksys.com/en-us/sup...ridges/wet610n

                      [ATTACH=CONFIG]23631[/ATTACH]

                      I've installed a bunch of these without problems. =^..^=

                      Dear Blackcat,

                      can you please share a step by step guide on how to setup this device.

                      thanks

                      Rakesh
                      View Life As A Continuous Learning Experience...

                        Comment

                        • blackcat4866
                          Master Of The Obvious

                          Site Contributor
                          10,000+ Posts
                          • Jul 2007
                          • 22997
                          #7
                          Re: Wifi Connection

                          It comes with an installation disk, but if you'd rather read: http://www.abson.com.ua/upload/Linksys/WET610N_QI.pdf
                          =^..^=
                          If you'd like a serious answer to your request:
                          1) demonstrate that you've read the manual
                          2) demonstrate that you made some attempt to fix it.
                          3) if you're going to ask about jams include the jam code.
                          4) if you're going to ask about an error code include the error code.
                          5) You are the person onsite. Only you can make observations.

                          blackcat: Master Of The Obvious =^..^=

                            Comment

                            • northernlife
                              Senior Tech

                              500+ Posts
                              • Sep 2011
                              • 847
                              #8
                              Re: Wifi Connection

                              You run the setup, it connects to wireless network, done. All it does is bridge the ethernet connection between the copier to the wireless. Once it's setup you have nothing left to do on it.

                                Comment

                                • jiongpao
                                  Trusted Tech
                                  • May 2009
                                  • 413
                                  #9
                                  Re: Wifi Connection

                                  Originally posted by blackcat4866
                                  http://support.linksys.com/en-us/sup...ridges/wet610n

                                  [ATTACH=CONFIG]23631[/ATTACH]

                                  I've installed a bunch of these without problems. =^..^=

                                  With this device i connect it to iIR7200 so that the machine will be in wireless mode? Or what is the purpose of using this device? As i know they want the machine able to print from their handphone.
                                  Last edited by jiongpao; 01-22-2014, 02:46 AM.

                                    Comment

                                    • blackcat4866
                                      Master Of The Obvious

                                      Site Contributor
                                      10,000+ Posts
                                      • Jul 2007
                                      • 22997
                                      #10
                                      Re: Wifi Connection

                                      Originally posted by jiongpao
                                      With this device i connect it to iIR7200 so that the machine will be in wireless mode?
                                      If it has a standard RJ45 Ethernet connector, sure. =^..^=
                                      If you'd like a serious answer to your request:
                                      1) demonstrate that you've read the manual
                                      2) demonstrate that you made some attempt to fix it.
                                      3) if you're going to ask about jams include the jam code.
                                      4) if you're going to ask about an error code include the error code.
                                      5) You are the person onsite. Only you can make observations.

                                      blackcat: Master Of The Obvious =^..^=

                                        Comment

                                        Previous template Next
                                        Working...