Canon IR C3200 on a network

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JDP9164
    #1

    Canon IR C3200 on a network

    Hi I am trying to configure a Canon IR C3200 on the network and unfortunately I do not find any menu proposing this network settup (IP @, mask,...) This printer has already worked on this same network but the C1 (Fiery) server has been exchanged due to a failure and then I try to make it run...
    any suggestion would be appreciate. How to get in this set up menu, in which order power on the printer or the C1 server,...
    JD
    Tags: None
    • printerguy77
      Technician
      • Feb 2014
      • 26
      #2
      Re: Canon IR C3200 on a network

      You more than likely have to reload system software and patches to the C 1 if you can't see it. Also make sure you have ing-cnt set to 3 in service mode.

        Comment

        • JDP9164
          #3
          Re: Canon IR C3200 on a network

          Thank you for answering my trouble. I suspected that. Nom I try to find out this software to manage th C1 (Fiery system software Installer...) which seems not easy to find.
          ing-cnt is set to 3


          Originally posted by printerguy77
          You more than likely have to reload system software and patches to the C 1 if you can't see it. Also make sure you have ing-cnt set to 3 in service mode.

            Comment

            Previous template Next
            Working...