[Misc] Canon IR5055 warmup and coming to ready problem

[essgee]

The copier comes to ready, but when you press the copy start button it flashes feeding paper, then it goes back into warming up, and the display reads printer warming up. This continues to cycle until you delete the copy or print job, etc. I've changed all the Thermistors.
Thanks for your help,
Steve

[northernlife]

Re: Canon IR5055 warmup and coming to ready problem

WHen you close the fixing/feeding tray it makes contact with two spring loaded black connectors. They may be damaged. What's copier > Display > Analog say when you're having this issue, should control rotation at 190 and start feeding at 198

[ernesto]

hi

can you print something for example pd print?

[northernlife]

Re: Canon IR5055 warmup and coming to ready problem

highly highly doubt it. What's analog say??

[JustManuals]

Re: Canon IR5055 warmup and coming to ready problem

http://www.justmanuals.com/canon-cop...f-p-22924.html $12.77 and instant download.

[essgee]

Re: Canon IR5055 warmup and coming to ready problem

highly highly doubt it. What's analog say??

Analog initially comes to ready 190-198, then fluctuates down to 140-145.

[essgee]

Re: Canon IR5055 warmup and coming to ready problem

hi

can you print something for example pd print?

Haven't tried, but will.

[essgee]

Re: Canon IR5055 warmup and coming to ready problem

highly highly doubt it. What's analog say??

Analog comes to 190-198, then will fluctuate down to 140-145.

[tinnyjay]

Re: Canon IR5055 warmup and coming to ready problem

The copier comes to ready, but when you press the copy start button it flashes feeding paper, then it goes back into warming up, and the display reads printer warming up. This continues to cycle until you delete the copy or print job, etc. I've changed all the Thermistors.
Thanks for your help,
Steve

Are you using a finisher with stapler?
If yes,try to remove staples.