Using F4 Ledger paper

[DericK370]

Re: Using F4 Ledger paper

It sound similar case with me previously. Cannot use FLSC for 4 months. If i got luck by following this track.

[jiongpao]

Re: Using F4 Ledger paper

Try this, if it does not work you better slide the guides to LGL/LTRR.
Goto Service Mode Level 2 > BODY > OPTION > CST > CST-U3
Use it to specify the name of paper in a paper size group (U3).
When any of the special size papers is specified for U3, the paper may be used as a special size paper for U3 (universal cassette). 2
settings, set it to 35: Folio, on the control panel FLSC will change to FOLIO.
Actually FOLIO = 210 X 330 mm and FLSC = 215 X 330 mm.
Still in Level 2, press OPTION > BODY > ORG-FLSC > change from 0 to 2.
You can also try ORG-A4R > change from 0 to 1.
Turn OFF then ON.

Wow at last u got it done. But the cassette 3 still remain showing FLSC and everything is good
Level 2 > COPIER > OPTION > CST > CST-U3 - set to 35
Level 2 > COPIER > OPTION > BODY > ORG-A4R > change from 0 to 1.

I though im gonna slide the paper guide to LGL/LTRR and glue some sort of PVC sheets at the side of paper guide to make it fit to folscap width. And my customer will gonna laught at me that time and you never know hes from your country too

Thank You bro.

[spectraindo]

Re: Using F4 Ledger paper

You're Welcome !