[CQ] C2550 C3080 C3480 Drum Rebuild info

[Simons]

Anyone replacing blades on these? Would love to see the info. No spares to sacrifice at the moment. Stop freak streaking.

[vamoursly]

Re: C2550 C3080 C3480 Drum Rebuild info

Yes I import parts from Singapore, google Magnetone and contact them for up to date pricing.

V

[Simons]

Re: C2550 C3080 C3480 Drum Rebuild info

Yes I import parts from Singapore, google Magnetone and contact them for up to date pricing.

V

Do you have rebuild instructions, I have a couple cyan drums that started a streak in the back. Katun Toner. kinda old drums though. I just need to replace the blades but dont know how. thanks

[vamoursly]

Re: C2550 C3080 C3480 Drum Rebuild info

Do you mean lines hoizontally on the page, more than likely the OPC drum is at fault over the blade. When blades fail they leave a wash type effect on the page.

Rebuilding drums is difficult and time consuming; plus results are not as good as an original drum from Canon, if you are in doubt I would suggest you purchase an OEM drum for the machine.

I do from rebuild these drums myself, because I enjoy rebuilding things

But I accept that there are issues, such as white lines in the dev side of the drum that is difficult to resolve once they occur.

V

[Simons]

Re: C2550 C3080 C3480 Drum Rebuild info

mine is for sure a blade. It looks like the drum doesnt have to come off. Looks like it can just push in under the drum ? two screws on each side. Is that it?