canon irc5180

[mramlawi]

Dear all ,
I have a canon irc5180 working fine but i have a problem on the driver h1 v2.0 that if i want to choose the bypass side to print the machine didnt take from the bypass even i choosed it its just taking from the casette theres anything in driver must do to understand the bypass ? Other driver works fine just the h1-ps driver.

[teckat]

Re: canon irc5180

Dear all ,
I have a canon irc5180 working fine but i have a problem on the driver h1 v2.0 that if i want to choose the bypass side to print the machine didnt take from the bypass even i choosed it its just taking from the casette theres anything in driver must do to understand the bypass ? Other driver works fine just the h1-ps driver.

-----------------------------------
do u have the PS Printer Kit installed
For PS printing, the optional Color PS Printer Kit must be installed.

For Color imageRUNNER C5185/C4580/C4080, the optional Color UFR II/PCL Printer Kit
must be installed before installing the optional PS Kit.


Under
Additional Functions>Common Settings>Draw Eligibility For APS/ADS>Other choose Bypass to enable for printing.

Also>Under Additional Fuctions>Common Settings>Draw Eligibility For APS/ADS>Printer see if a Bypass option is/now available.

[mramlawi]

Re: canon irc5180

-----------------------------------
do u have the PS Printer Kit installed
For PS printing, the optional Color PS Printer Kit must be installed.

For Color imageRUNNER C5185/C4580/C4080, the optional Color UFR II/PCL Printer Kit
must be installed before installing the optional PS Kit.


Under
Additional Functions>Common Settings>Draw Eligibility For APS/ADS>Other choose Bypass to enable for printing.

Also>Under Additional Fuctions>Common Settings>Draw Eligibility For APS/ADS>Printer see if a Bypass option is/now available.

thank you teckat ,

i also had the PS kit on it and i made your steps but also its not workin its take from the drawers not from the bypass i used a pcl driver it works but on the PS driver not workin i wonder why .

[teckat]

Re: canon irc5180

thank you teckat ,

i also had the PS kit on it and i made your steps but also its not workin its take from the drawers not from the bypass i used a pcl driver it works but on the PS driver not workin i wonder why .

---------

Delete the PS driver/ then download again / make sure 5180 Printer description shows correct in driver properties

[Canuck]

Re: canon irc5180

On all documents? Probably not... Open the document and look in page options or something similar. I see this a lot with Word...Word tells it to print from a certain tray even if you tell it differently in driver. Application overrides driver...SEEN MANY TIMES

[northernlife]

Re: canon irc5180

---------

Delete the PS driver/ then download again / make sure 5180 Printer description shows correct in driver properties

If get device status fails, then the driver crapped out.

[mramlawi]

Re: canon irc5180

yes in all documents also i changed the inside the driver settings same issue

[teckat]

Re: canon irc5180

yes in all documents also i changed the inside the driver settings same issue

-------------------------------------------------------------------------------------
so PS Driver defaults to the cassettes for Paper size selection on BYPASS

is this on all size selections using PS DRIVER

PS DRIVER SETTINGS

1. Go to the Start>Settings>Printer folder. Right click on the printer in question and choose Properties.
2. Go to the Device Settings tab, then click "Form to Tray Assignment".

3. In the Form to Tray Assignment window, choose Stack Bypass and highlight all the types of paper which you intend to use.
4. Click OK.


is this the driver u are using


Canon U.S.A. : Office Equipment : imagePASS-H1

imagePASS-H1 v2.0 PostScript Driver for Windows 32 and 64 bit Operating Systems. This driver supports Windows XP/Vista/2003/2008/Win 7/Win 8/Win 8.1/2012.

[mramlawi]

Re: canon irc5180

-------------------------------------------------------------------------------------
so PS Driver defaults to the cassettes for Paper size selection on BYPASS

is this on all size selections using PS DRIVER

PS DRIVER SETTINGS

1. Go to the Start>Settings>Printer folder. Right click on the printer in question and choose Properties.
2. Go to the Device Settings tab, then click "Form to Tray Assignment".

3. In the Form to Tray Assignment window, choose Stack Bypass and highlight all the types of paper which you intend to use.
4. Click OK.


is this the driver u are using


Canon U.S.A. : Office Equipment : imagePASS-H1

imagePASS-H1 v2.0 PostScript Driver for Windows 32 and 64 bit Operating Systems. This driver supports Windows XP/Vista/2003/2008/Win 7/Win 8/Win 8.1/2012.

thanks teckat ,

but the website not let me download the file to check if thats it givein me error also the steps that you wrote it for me i couldnt find it (driver setting) start ....

[teckat]

Re: canon irc5180

thanks teckat ,

but the website not let me download the file to check if thats it givein me error also the steps that you wrote it for me i couldnt find it (driver setting) start ....

-----------------------------------------------


U have a H1 FIERY & a PS Kit installed in this printer ?
what ver. is H1 ?? 1.2 or 2.0
the support different driver ver's.

see link below

Canon imagePASS-H1 Drivers Download for Windows.

Copier Models:	Supported Print Controllers:
imageRUNNER C4080i / C4580i / C5180i	- UFRII/PCL Printer Kit -N1 (standard) - PS Printer Kit -N1 * (optional) - imagePASS H1 ** (optional) - ColorPASS GX100 ** (optional)
imageRUNNER C4080 / C4580 / C5180	- UFRII/PCL Printer Kit -N1 (optional) - PS Printer Kit -N1 * (optional) - imagePASS H1 (optional) - ColorPASS GX100 (optional)

* PS Printer Kit-N1 requires that UFRII/PCL Printer Kit-N1 and iR 512MB Expansion RAM-C1 be previously installed.(bringing total memory on copier to 1.5 GB)

** Requires the optional Open Interface Board on the 'i' models.

[Canuck]

Re: canon irc5180

What OS workstation running?

[mramlawi]

Re: canon irc5180

What OS workstation running?

Win7