old canon analog

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sammy62x
    #1

    old canon analog

    I've got an old canon analog that's 33 cpm. I think the model # is 3350 and it show a jam on the right side (by the registration rlr). Has anyone seen this problem? I'm thinking it's a sensor actuator that's out of place but I didn't have time to take the thing apart.
    Tags: analog, canon
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Well, there is no 3350. How about NP3325, NP3825, NP3050, NP4050?

      Let's get the model straight before we start proposing solutions.
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Looks like he didn't have time to look at it either, go ahead, give him some tips, maybe he won't have time to test those either. Seems he had time to post here though. Kinda shows you where his priorities are...........

            Comment

            • DadO
              Trusted Tech

              Site Contributor
              250+ Posts
              • Dec 2007
              • 401
              #4
              Check the cables of the sensor for any cracks and clean/replace the sensor .
              If i remember, there shouldn't be more then 2 sensors but don't take me for a word

                Comment

                Previous template Next
                Working...