[CQ] IR4570 finisher paper holder counter setting

[jaruwit]

I have 2 IR4570. The first machine. I count 10 sheet in process tray after that it push paper to stack tray. The second, I count 30 sheet. the problem is in 30 sheet. Some paper curve push previous paper out of tray.
I want to set amount of paper before push to stack tray. How to set counter?

[teckat]

Re: IR4570 finisher paper holder counter setting

I have 2 IR4570. The first machine. I count 10 sheet in process tray after that it push paper to stack tray. The second, I count 30 sheet. the problem is in 30 sheet. Some paper curve push previous paper out of tray.
I want to set amount of paper before push to stack tray. How to set counter?

000000000000000000000

Stack Trays may be warped.
replace the upper 4A3-1070-000 and the lower 4A3-1069-00 Dummy Pass trays.

[jaruwit]

Re: IR4570 finisher paper holder counter setting

Do you have picture diagram of upper 4A3-1070-000 and the lower 4A3-1069-00?

[jaruwit]

Re: IR4570 finisher paper holder counter setting

Why first machine count 10 sheet and second count 30 sheet before push to stack?
Can I set counter or adjust sensor?

[teckat]

Re: IR4570 finisher paper holder counter setting

why first machine count 10 sheet and second count 30 sheet before push to stack?
Can i set counter or adjust sensor?

========================

#11=	4a3-1070-000/pass, dummy, upper

#10=4a3-1069-000/pass, dummy, lower


[ATTACH=CONFIG]26482[/ATTACH]