IRC2380 Poor Black Solids

[Rachid.Akli]

Re: IRC2380 Poor Black Solids

Hi to all,

What about if the hopper is not supplying the drum (dev) with toner ? The value of the following address should be around "0" : Service mode > Display > Dens > SGNL-K. If it isn't the case, verify your black hopper.

Rachid.

[copier tech]

Re: IRC2380 Poor Black Solids

i've not been back for a few weeks, the customer mainly prints text so it's not very noticeable, but at next visit I will try what has been suggested so far.