Error code E 532 -0001 on Saddle finisher K4.

[Ingranaggio_rotto]

Hi to everybody.
I have this code error in a Saddle finisher K4 : E 532 -0001.
The motor of the staple unit does not moves.
I checked the main switches of the finisher, the PCB drives, but it's all ok.

Suggestions ?


P. S. :Is there a way to put the finisher in "limited function"?

[vigour]

Re: Error code E 532 -0001 on Saddle finisher K4.

No Limited Function on this, No DIP switch to turn stalper off either.
The harness between stapler and controller flexes and eventually break.
Not fun to replace.
There is apart number somewhere with the stapler base and harness

[laitang]

Re: Error code E 532 -0001 on Saddle finisher K4.

From SM:
K4-E532.JPG

[teckat]

Re: Error code E 532 -0001 on Saddle finisher K4.

Hi to everybody.
I have this code error in a Saddle finisher K4 : E 532 -0001.
The motor of the staple unit does not moves.
I checked the main switches of the finisher, the PCB drives, but it's all ok.

Suggestions ?


P. S. :Is there a way to put the finisher in "limited function"?

---------------------

What model is K4 on ????????

[Ingranaggio_rotto]

Re: Error code E 532 -0001 on Saddle finisher K4.

It's the model installed on Canon iR 105 +.
I think the cause of fault be the main cable of the PCB Driver . (It's broken )
But must be verified.