Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ts-lx
    Technician

    50+ Posts
    • May 2011
    • 59
    #1

    [Dead] Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

    Need canon4225 number plate number( ECO ID PCB Part Numbers )E350 thANK ! urgent
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

      Originally posted by ts-lx
      Need canon4225 number plate number( ECO ID PCB Part Numbers )E350 thANK ! urgent
      ================================================== ===
      U can only order an ECO BOARD from Canon Tech Support Office/

      ECO ID PCB continues to be a restricted part

      DO NOT CHANGE TWO OR MORE BOARDS AT ANY ONE TIME. THIS CAN RESULT IN THE
      EQUIPMENT ENTERING AN ERROR CODE LOOP. ONCE THIS OCCURS, YOU MUST CONTACT THE
      CANON TECHNICAL SUPPORT CENTER FOR ASSISTANCE.

      ECO ID PCB and cannot be swapped with one from any other engine.


      imageRUNNER ADVANCE 4025 * 4035 * 4045 * 4051 * 4225 *
      Error Code E350

      error code E350 occurs when the machine is powered on.


      With the main power switch off, Remove & Re-seat connector J8134 on Main Controller PCB 2 and connector J1 on Serial Number PCB. //

      Power back up

      The following photo shows the location of the two PCB's and connectors.
      E350.JPG
      Last edited by teckat; 10-23-2014, 06:18 AM.
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • ts-lx
          Technician

          50+ Posts
          • May 2011
          • 59
          #3
          Re: Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

          Originally posted by teckat
          ================================================== ===

          imageRUNNER ADVANCE 4025 * 4035 * 4045 * 4051 * 4225 *
          Error Code E350

          error code E350 occurs when the machine is powered on.


          With the main power switch off, Remove & Re-seat connector J8134 on Main Controller PCB 2 and connector J1 on Serial Number PCB. //

          Power back up

          The following photo shows the location of the two PCB's and connectors.
          [ATTACH=CONFIG]26876[/ATTACH]
          The ECO ID PCB is broken Would like to order without a number
          thank you
          You are in that country, the absolute master

            Comment

            • laitang
              Senior Tech

              500+ Posts
              • Nov 2012
              • 627
              #4
              Re: Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

              Originally posted by ts-lx
              Need canon4225 number plate number( ECO ID PCB Part Numbers )E350 thANK ! urgent

              ir-4225_eco id pcb.JPG

                Comment

                • ts-lx
                  Technician

                  50+ Posts
                  • May 2011
                  • 59
                  #5
                  Re: Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

                  Originally posted by laitang
                  [ATTACH=CONFIG]26877[/ATTACH]


                  捕获.JPG

                    Comment

                    • teckat
                      Field Supervisor

                      Site Contributor
                      10,000+ Posts
                      • Jan 2010
                      • 16083
                      #6
                      Re: Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

                      Originally posted by laitang
                      [ATTACH=CONFIG]26877[/ATTACH]



                      THAT IS NOT THE ECO ID PCB
                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                        Comment

                        • teckat
                          Field Supervisor

                          Site Contributor
                          10,000+ Posts
                          • Jan 2010
                          • 16083
                          #7
                          Re: Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

                          Originally posted by ts-lx
                          [ATTACH=CONFIG]26878[/ATTACH]
                          BOTTOM LINE IS-----------

                          U can only order an ECO BOARD from Canon Tech Support Office                          /

                          ECO ID PCB continues to be a restricted part
                          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                            Comment

                            • ts-lx
                              Technician

                              50+ Posts
                              • May 2011
                              • 59
                              #8
                              Re: Need canon4225 number plate number( ECO ID PCB Part Numbers )E350

                              Originally posted by teckat
                              BOTTOM LINE IS-----------

                              U can only order an ECO BOARD from Canon Tech Support Office                              /

                              ECO ID PCB continues to be a restricted part
                              thank yuo

                                Comment

                                Previous template Next
                                Working...