Remote Operation viewer v1.2

[NakSumpu]

Re: Remote Operation viewer v1.2

VNC license code:

7531 3618 0529 7308 6137 3836

after I input the VNC license code, the machine displays an error Code E748-9000 what do I have to do? Please help me

[ts-lx]

Re: Remote Operation viewer v1.2

Serial Number : NMC10915

Email : sesens08@gmail.com

VNC license code:

7531 3618 0529 7308 6137 3836

[NakSumpu]

Re: Remote Operation viewer v1.2

要安装vnc功能，可以向我提供序列号

Serial Number : NMC10915

Email : sesens08@gmail.com

[teckat]

Re: Remote Operation viewer v1.2

To install the vnc feature, you can provide me with the serial number.

---

timetravel.gif

[giogi]

Re: Remote Operation viewer v1.2

? Translated🤔

To install the vnc feature, you can provide me with the serial number.

[teckat]

Re: Remote Operation viewer v1.2

要安装vnc功能，可以向我提供序列号

? Translated🤔

[ts-lx]

Re: Remote Operation viewer v1.2

要安装vnc功能，可以向我提供序列号

[teckat]

Re: Remote Operation viewer v1.2

I have done the above steps, but I still can't find Remote Operation Settings.
[ATTACH=CONFIG]46898[/ATTACH]
What should I do?


thanks.

Canon ImageRUNNER Advance: Remote Operation Software
Link Instructions PDF below

Adobe Acrobat

[giogi]

Re: Remote Operation viewer v1.2

but are you sure that in IRADV 6275 the remote operator is by default and not an option?
check:
press counter> device information>check device configuration> and read if the Remote operator appears among the options present

[NakSumpu]

Re: Remote Operation viewer v1.2

I have done the above steps, but I still can't find Remote Operation Settings.
Remote UI.jpg
What should I do?


thanks.

[teckat]

Re: Remote Operation viewer v1.2

Press [Management Settings] → [Licenses / Others] I can't find [Remote Operation Settings]
[ATTACH=CONFIG]46873[/ATTACH]
What do I need to do for the Remote Operation Settings to appear?

================================================== ======
Remote UI

08KR-22R

This mode enables you to use the Remote UI (User Interface) to operate the machine and change settings.

1

Press (Settings/Registration).

2

Press [Management Settings] → [License/Other] → [Remote UI].

3

Press [On] → specify each setting.
If a screen prompting you to change a System Manager PIN is displayed, change a PIN by following the procedures described in "Specifying the System Manager Settings," and then set this function to 'On'.
Press [Off] → [OK] to disable setting the machine from the Remote UI.
Press [On] for <Use SSL> to use SSL communication.
Select [On] for <Use Reference Print> to allow printing by entering it URL.

NOTE

Before setting <Use SSL> to 'On', it is necessary to set a default key in [Preferences] (Settings/Registration). (See "Setting the Key Pair Used With SSL Encrypted Communications.") Any changes made to <Use SSL> are also applied to [Use SSL] in [MEAP Settings] in [Management Settings] (Settings/Registration). (See "MEAP Settings.")

When the login service is set to Default Authentication and [Department ID Management] is set to 'Off' but the System Manger ID is specified：
When settings other than above are specified:
When the login service is set to Default Authentication and [Department ID Management] is set to 'Off' but the System Manger ID is specified：

Specify each setting → press [Next].
Specify each setting for access by general users → press [OK].
Press [Allow] to allow access by general users, or press [Do Not Allow] not to allow access by general users.
When you press [Allow], to set a PIN if necessary, press [Access PIN].
When settings other than above are specified:

Specify each setting → press [OK].

---

imageRUNNER ADVANCE 6275 / 6265 / 6255
User's Guide-----------

LINK-


https://oip.manual.canon/USRMA-0112-zz-CS-enUV/contents/1T0001918020.html#11c5649f75809413c96448c907e44a4b

=================================================
Remotely operate the machine from the comfort of your desk!

Remote UI enables you to access the machine from your computer.

Check the status of jobs and consumables, and restart or shutdown the machine, all from your computer.

Overview of the Remote UI Overview of This Function Checking and Operating Jobs from the Remote UI Managing Jobs Device Status and Information Display Restarting and Shutting Down the Machine from the Remote UI Restarting the Machine Shutting Down the Machine from the Remote UI Specifying Various Settings from the Remote UI Saving All Settings Information to a Computer (Export All) Loading All Settings Information (Import All) Saving Settings Information to a Computer (Export Individually) Loading Settings Information (Import Individually) Backing Up Stored Data Managing the Address Lists Managing Inboxes

[NakSumpu]

Re: Remote Operation viewer v1.2

Press [Management Settings] → [Licenses / Others] I can't find [Remote Operation Settings]
IMG_20200925_234225.jpg
What do I need to do for the Remote Operation Settings to appear?

[NakSumpu]

Re: Remote Operation viewer v1.2

---

[Windows 32bit & 64bit] Remote Operation Viewer V2.3.0



[Windows 32bit & 64bit] Remote Operation Viewer V2.3.0


https://condoroffice.co.uk/manuals/iradv350/contents/1T0002813907.html

Enabling the Remote Operation
1.
Press (Settings/Registration).
2.
Press [Management Settings] → [License/Other] →[Remote Operation Settings].
3.
Press [On] → [OK].
Press [Password] to set the password.

IMPORTANT

To perform the procedure described in this section, you must log in to the machine as an administrator. (See "Logging In to the Machine as an Administrator.") This mode is enabled only after you restart the machine. For instructions on restarting the machine (turning the main power switch OFF, and then ON), see "How to Turn On the Main Power."

NOTE

You can enter up to 8 alphanumeric characters for the password.

Press [Management Settings] → [Licenses / Others] I can't find [Remote Operation Settings]
IMG_20200925_234225.jpg
What do I need to do for the Remote Operation Settings to appear?

[teckat]

Re: Remote Operation viewer v1.2

How to connect Remote operation Viewer to ir-adv 6275 machine?

Thank you.

---

[Windows 32bit & 64bit] Remote Operation Viewer V2.3.0



[Windows 32bit & 64bit] Remote Operation Viewer V2.3.0


https://condoroffice.co.uk/manuals/iradv350/contents/1T0002813907.html

Enabling the Remote Operation
1.
Press (Settings/Registration).
2.
Press [Management Settings] → [License/Other] →[Remote Operation Settings].
3.
Press [On] → [OK].
Press [Password] to set the password.

IMPORTANT

To perform the procedure described in this section, you must log in to the machine as an administrator. (See "Logging In to the Machine as an Administrator.") This mode is enabled only after you restart the machine. For instructions on restarting the machine (turning the main power switch OFF, and then ON), see "How to Turn On the Main Power."

NOTE

You can enter up to 8 alphanumeric characters for the password.

[giogi]

Re: Remote Operation viewer v1.2

try to use Remote Operation viewer v2.2