need help.. how to clean developer ir6570

[813200217]

toner ink get into unit 1, so i need to clean, how to do it?
after some time it became so much ink

[DAG COPIERS & COMPUTERS]

Re: need help.. how to clean developer ir6570

toner ink get into unit 1, so i need to clean, how to do it?
after some time it became so much ink

You need to use a 'Common sense approach' to this problem! First observe and establish or identify the source of the toner leakage and why; cleaning the developing unit is not a big deal, remove it from main unit, empty it of toner , using a blower remove any residual toner on cylinder, then use a solution of 'Brasso' on a piece of rug to wipe and 'polish' the magnetic cylinder. Allow to dry, re-polish and you are done.

[Brian8506]

Re: need help.. how to clean developer ir6570

Check the pre transfer assembly. Vacuum it out. May have to replace scraper blade in there. Probably spilling down to t/s unit

[V-P]

Re: need help.. how to clean developer ir6570

You need to use a 'Common sense approach' to this problem! First observe and establish or identify the source of the toner leakage and why; cleaning the developing unit is not a big deal, remove it from main unit, empty it of toner , using a blower remove any residual toner on cylinder, then use a solution of 'Brasso' on a piece of rug to wipe and 'polish' the magnetic cylinder. Allow to dry, re-polish and you are done.

First time I hear about this. Why in magnetic cylinder ?

[813200217]

Re: need help.. how to clean developer ir6570

can anyone upload the video in yooooooooooutube how to clean the developing?
i want to try clean it by myself..

[DAG COPIERS & COMPUTERS]

Re: need help.. how to clean developer ir6570

First time I hear about this. Why in magnetic cylinder ?

Developing cylinder! I thought the poster wants to know how to clean the developing assembly...and that would involve emptying off toner, i suppose? Sorry, seem to have misinterpreted his post.

[habibi]

Re: need help.. how to clean developer ir6570

toner ink get into unit 1, so i need to clean, how to do it?
after some time it became so much ink

you should clean it with a

https://www.google.com/search?q=blower&rlz=1C1CHMO_enID581ID581&espv=2&biw=1440&bih=809&tbm=isch&tbo=u&source=univ&sa=X&ei=wCxoVJvfFNGGuATE5YCgCw&ved=0CDMQsAQ#facrc=_&imgdii=_&imgrc=3EXsGyknrli2IM%253A%3BB97EwrvBlXfsqM%3Bhttp%253A%252F%252Fparagmachinetools.com%252Fwp-content%252Fuploads%252F2013%252F06%252FPortable-Blower-HD1202-.jpg%3Bhttp%253A%252F%252Fwww.tomsguide.com%252Fanswers%252Fid-1863758%252Fcleaning-speakers-blower.html%3B1695%3B1125blower

could be leaking toner