Hello everyone. My old Canon Ir550 just got problem. E001 appeared after I switched on the machine. I don't know how could solve this problem. Is there any possibility to fix that by myself?
-
-
YES, CALL A TECH
-
E001 code
xcopytech,
Can you be nice.
Bubu just looking for some help ?
Bubu,
You just need to clear that code !
To clear the code.........................Yes xcopytech is RIGHT.
You need a tech!!!Comment
-
Now, Hilton, you don't want this guy to melt down his fuser, do you? It's so messy, and much harder to fix after that. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Cmon be nice. go into service mode and clear the error and it might work, if it does not then you need service tech. Could have been a power glitch from wall.Comment
Comment