Morning all, I have been asked to update firmware on a Canon IRC1021i to allow a 3rd party software to run on it. I am experienced on most makes except Canon re this procedure, could anybody possibly help with where to obtain it and how to update it?? Many thanks, Paul.
-
-
Re: Firmware
================================================== ====================
CiRC1022 Flashing procedure.pdf
iR1022C > EXAMPLE
The software used to flash this model is called the User Support Tool.
X=The Service Support Tool is not used in flashing this model imageRUNNER=X
1- download the latest firmware
Make sure to extract the file, the default folder location is C:\Canon File Folder\SST System Software Folder\SST Files.
Launch the .exe and it will show you the following:
Choose Next >
Make sure the C1022 is in Download Mode and connected via USB or network cable.
Then click Next >
You can specify the machine by printer name or IP address. Then click Next > .
Start when ready. The firmware will be downloaded to machine. C1022 will show Updating Firmware Do not reboot.
Once you see the message:
Firmware is complete.
The device will restart automatically.
Press OK and the C1022 will reboot.**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Re: Firmware
================================================== ========
To enter Service Mode press the Main Menu button, then 2, then 8, and again the Main Menu button.
COPIER > DISPLAY > VERSION<VERSION>
MAIN= Display of the version/checksum/date of Bootable (product program area)
BOOT= Display of the version/checksum/date of BootROM (boot program area)
ECONT= Display of the ROM version of the recording engine
what is firmware ver. on Printer ?
what is 3rd Party software ?
who told u that u need to update ?**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
Comment