iR4570 Remove Finisher

[mrfuser]

I have a client with an old 4570 that wants the finisher removed. Is there anything we should be aware of when removing the finisher?
I believe it is a q3 finisher.


Thanks

[Tricky]

Re: iR4570 Remove Finisher

Yes when you fit the buffer bypass you remove three parts, these will need to be replaced.

FC5-0798-000 FLAG, FULL DETECT

FC5-0889-000 COVER, BLANKING

FC5-0957-000 CAP, INTERNAL PAPER DELIVERY

[mrfuser]

Re: iR4570 Remove Finisher

So we can't just remove the finisher without adding those parts?
Anything need changing in service mode?
Thanks

[Tricky]

Re: iR4570 Remove Finisher

You can remove the finisher and leave the buffer in place.

In service mode > option > acc > in-tray set this to a one.

Reboot machine and in additional functions > common settings > paper output you can select copies, prints etc to come out on the buffer.