Erroe code E 804 -0007 on iRADV C7055 at power on.

[Ingranaggio_rotto]

Good saturday to everybody !
Another fault I found on my road !
Erroe code E 804 -0007 on iRADV C7055 at power on.

I changed the relative fan;
I cleaned the rear connectors of the feed unit !

But I have the same code !

Solutions ?

Thank you !

[laitang]

Re: Erroe code E 804 -0007 on iRADV C7055 at power on.

E 804 -0007: A failure was detected at the IH power supply fan (FM7).

1. Check the connection of the connector.
2. Replace the IH power supply fan (FM7).

[teckat]

Re: Erroe code E 804 -0007 on iRADV C7055 at power on.

Intermittent E804 - 0007 was indicated at power on. A failure was detected at the IH Power Supply fan (FM7).

:
In one case, after inspecting the fan FM7 and in IO mode at address P028-bit 8 indicating "0", it was decided to replace the IH Power Supply and the fan FM7 at the same time to resolve this error code.

IH Power Supply Fan FK2-3679-000 (FM7)






IH Power Supply PCB FK3-9584-000 (UN30)