can ir6570 print using tracing paper?

[813200217]

can ir6570 print using tracing paper.???
i never tried that before???

[Ctl-Alt-Del]

Re: can ir6570 print using tracing paper?

can ir6570 print using tracing paper.???
i never tried that before???

Maybe, what are the specs on the paper?

[teckat]

Re: can ir6570 print using tracing paper?

can ir6570 print using tracing paper.???
i never tried that before???

========================


Transparency
BT-400 Trasparency
4mil/142gsm

tracing paper sizes---
A3, B4, A4R,
A4, B5R, B5
use in manual feeder tray only
Some types of tracing paper cannot be used-

Feed tracing paper one sheet at a time, and remove each sheet as it is delivered to the output tray. Loading several sheets of tracing paper together may cause paper jams.
If you select [Transparency], [Tracing Paper], or [Labels], make sure that you do not specify any Finisher modes (Collate, Group, or Staple).

[813200217]

Re: can ir6570 print using tracing paper?

i already tried, ir 6570 can print using tracing paper..

but there is another problem..
i have 2 ir6570 and 1 ir5075..
three of them have the same problem

i insert the tracing paper to a3 drawer.. then i print it.
it always has a cease side..

any suggestion?...

anyway, i already refuse that order (print using tracing paper)

[teckat]

Re: can ir6570 print using tracing paper?

i already tried, ir 6570 can print using tracing paper..

but there is another problem..
i have 2 ir6570 and 1 ir5075..
three of them have the same problem

i insert the tracing paper to a3 drawer.. then i print it.
it always has a cease side..

any suggestion?...

anyway, i already refuse that order (print using tracing paper)

--------------------------------------------------------------------------------------------
sorry about that note on Transparencymy mistake----
================================================== ================================================== ===========

[QUOTE][/can ir6570 print using tracing paper.???
i never tried that before???
QUOTE]


If you are making prints on Tracing Paper, labels, transparencies, or nonstandard paper size stock, load the paper stock into the stack bypass.

*****use in manual feeder tray only(stack bypass)one sheet at a time

Some types of tracing paper cannot be used-