Ir7095 paper jump need help

[ugaa]

I have IR7095.The machine hase been kept in store for a while. When switched it shows paper jump but there is no signs of paper jump. I tried to clean the drum an changed the cloth.
Please help.

[teckat]

Re: Ir7095 paper jump need help

I have IR7095.The machine hase been kept in store for a while. When switched it shows paper jump but there is no signs of paper jump. I tried to clean the drum an changed the cloth.
Please help.

U mean Jam Paper_?

[ugaa]

Re: Ir7095 paper jump need help

Yes

[zoraldinho]

Re: Ir7095 paper jump need help

Check paper sensors and flags around jam area.

[teckat]

Re: Ir7095 paper jump need help

Yes

How long was printer out of commission_?
Was it covered in a dust free area_?

Jam location_?
Remove all paper path assemblies >inspect_clean

?? Are u a tech_??

[ugaa]

Re: Ir7095 paper jump need help

How long was printer out of commission_?
Was it covered in a dust free area_?

Jam location_?
Remove all paper path assemblies >inspect_clean

?? Are u a tech_??

1 year. It's not kept free dust area. I will check it. I am not tech.
i bought the machine in UK then exported to Somalia. So the machine is in Somalia now.

[teckat]

Re: Ir7095 paper jump need help

1 year. It's not kept free dust area. I will check it. I am not tech.
i bought the machine in UK then exported to Somalia. So the machine is in Somalia now.

------------------------------

dusty area issue & and the ever-present shipping headache for a printer

u could have a loose connection to a sensor, or a sensor is out of place.

printer needs to be stripped down>cleaned & inspected then tested/

was the finisher also shipped ? & if so> installed properly

[ugaa]

Re: Ir7095 paper jump need help

------------------------------

dusty area issue & and the ever-present shipping headache for a printer

u could have a loose connection to a sensor, or a sensor is out of place.

printer needs to be stripped down>cleaned & inspected then tested/

was the finisher also shipped ? & if so> installed properly

Yes the finisher is also shipped.
I cleaned again although I do not know where the spencer is located. Once cleaned I received a error code E000568-8001 . Can you help?

[Manxengineer]

Re: Ir7095 paper jump need help

E000568-8001 if I remember rightly is a fault with exit tray on the finisher? check there's nothing blocking the finisher trays, and that they are moving up and down freely

[Canuck]

Re: Ir7095 paper jump need help

E568-8001 is a transport shift motor error. Call a tech

[ugaa]

Re: Ir7095 paper jump need help

E568-8001 is a transport shift motor error. Call a tech

Error has gone and it's back to the same propel. System screen shows The paper has jammed. I sea no paper in the machine.

[teckat]

Re: Ir7095 paper jump need help

Error has gone and it's back to the same propel. System screen shows The paper has jammed. I sea no paper in the machine.

this is not about paper>

get a tech to look in service mode AT JAM HISTORY

Stationary jam from power-on

jam.jpg


L: location of jam
CODE: jam code
P: source of paper


jam2.jpg