[Error Code] Error Code: Imagepress 6010

[Guest]

We keep getting the error E000000-0102-05, but it comes and goes. Could this be a
bad connection somewhere?

[teckat]

Re: Error Code: Imagepress 6010

We keep getting the error E000000-0102-05, but it comes and goes. Could this be a
bad connection somewhere?

----------------------------------------
E000-0102 Error Code Intermittent
in service mode
COPIER/OPTION/USER/ FX1BC-SW > set to "0".
-Fixing Belt Drive Assembly check or replace it.

-Lower Fixing Belt Timing Belt_check the teeth on belt (XF2-1805-280)


Check on the Primary Fixing Unit > the Lower Belt Drive Assy.
This is located on the rear of the lower part of the Primary Fixing Unit.
Check the transmission shaft, bearing and the 19T gear as shown in FIGURE 816 FIRST FIXING ASSEMBLY, LOWER (2/2) items 40 (FU6-0343-000 which is the 19T gear), item 47 (XG9-0286-000 which is the bearings) and item 55 (FC6-0361-000 which is the transmission shaft).

You want to inspect these components as the bearing possibly could seize on the transmission shaft and strip the 19T gear. If this occurs, then the lower fixing belt will not heat up due to no rotation and hence the E000 0102 error code.

================================================== ========================

Did u check if the fixing belt has damaged or the timing belt is broken.

[kytech]

Re: Error Code: Imagepress 6010

Thanks. You were correct. Belt was missing some teeth

[teckat]

Re: Error Code: Imagepress 6010

Thanks. You were correct. Belt was missing some teeth

==================

keep up the good work !!
investigation.jpg

[petros13]

Re: Error Code: Imagepress 6010

----------------------------------------
E000-0102 Error Code Intermittent
in service mode
COPIER/OPTION/USER/ FX1BC-SW > set to "0".
-Fixing Belt Drive Assembly check or replace it.

-Lower Fixing Belt Timing Belt_check the teeth on belt (XF2-1805-280)


Check on the Primary Fixing Unit > the Lower Belt Drive Assy.
This is located on the rear of the lower part of the Primary Fixing Unit.
Check the transmission shaft, bearing and the 19T gear as shown in FIGURE 816 FIRST FIXING ASSEMBLY, LOWER (2/2) items 40 (FU6-0343-000 which is the 19T gear), item 47 (XG9-0286-000 which is the bearings) and item 55 (FC6-0361-000 which is the transmission shaft).

You want to inspect these components as the bearing possibly could seize on the transmission shaft and strip the 19T gear. If this occurs, then the lower fixing belt will not heat up due to no rotation and hence the E000 0102 error code.

================================================== ========================

Did u check if the fixing belt has damaged or the timing belt is broken.

Hi do you know how to get into service mode on a canon and Toshiba?

[teckat]

Re: Error Code: Imagepress 6010

Hi do you know how to get into service mode on a canon and Toshiba?

why

u will mess things up/

[petros13]

Re: Error Code: Imagepress 6010

No I will not,I have never worked on any of those, but i have worked on other brand.

[teckat]

Re: Error Code: Imagepress 6010

No I will not,I have never worked on any of those, but i have worked on other brand.

different Canon models have various ways to enter service mode/or modes
service mode is useless without manuals
========================================
same thought here

https://www.google.com/#q=toshiba+printers+enter+service+mode

[petros13]

Re: Error Code: Imagepress 6010

Thanks

[petros13]

Re: Error Code: Imagepress 6010

The ones I am interested in is the Toshiba DP6550 and Canon image maket F145300

[teckat]

Re: Error Code: Imagepress 6010

The ones I am interested in is the Toshiba DP6550 and Canon image maket F145300

Model: F145300
what is that

[petros13]

Re: Error Code: Imagepress 6010

sxp16622

[petros13]

Re: Error Code: Imagepress 6010

Image runner

[teckat]

Re: Error Code: Imagepress 6010

sxp16622

No such product in Canon line.

Guess u are not a tech.