Canon IR3045 Network Scan - Color Document to Black and White Scan - Very Dark

[bineeshgeorge]

Re: Canon IR3045 Network Scan - Color Document to Black and White Scan - Very Dark

Change the colour mode to half tone in net work scangear.

Sent from my HTC Desire X dual sim using Tapatalk

[MFPTech]

Re: Canon IR3045 Network Scan - Color Document to Black and White Scan - Very Dark

Try also the Canon Netgear scanning software and see if it makes a difference.

[cscce]

Re: Canon IR3045 Network Scan - Color Document to Black and White Scan - Very Dark

I am using Canon IR3045. I use microsoft office tool and foxit reader to scan the documents. Black and White documents are scanner properly. But when i scan color document, it is very dark.

I tried to change resolution to 600 DPI. The scan output is very dark. I changed the resolution to 300DPI and i am still getting the darker scanned copy which is not very clear to view.

Is there any solution to get good scanned copy of color documents?

I ran into this problem on an IRA c5030. Running the Auto Gradation (Full Adjust) fixed the problem.

[canonbundy]

Re: Canon IR3045 Network Scan - Color Document to Black and White Scan - Very Dark

Maybe try White Level adjustment, SRV MODE - COPIER - FUNCTION - CCD - WTLV1 & WTLV2. Highlight WTLV1 place an A3 sheet on Platen Glass - ok, then highlight WTLV2 then place an A3 sheet in Doc Feeder - ok. Reboot unit & test. Clean Scan & Platen Glass 1st.

[agriz]

I am using Canon IR3045. I use microsoft office tool and foxit reader to scan the documents. Black and White documents are scanner properly. But when i scan color document, it is very dark.

I tried to change resolution to 600 DPI. The scan output is very dark. I changed the resolution to 300DPI and i am still getting the darker scanned copy which is not very clear to view.

Is there any solution to get good scanned copy of color documents?