Canon c5051 advanced cleaning blade replacment?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • acsolutions
    Senior Tech

    500+ Posts
    • Jun 2010
    • 519

    #1

    [CQ] Canon c5051 advanced cleaning blade replacment?

    Hello, machine streaking due to transfer belt not cleaning! Never worked on one of these but I can see what needs to be done. so I was wondering if there's anything special I need to do when I replace the transfer belt cleaning blade and the less steps possible to replace it? I pulled the unit out and I believe on the left hand side of the unit there is two screws that I believe access the blade?
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: Canon c5051 advanced cleaning blade replacment?

    Originally posted by acsolutions
    Hello, machine streaking due to transfer belt not cleaning! Never worked on one of these but I can see what needs to be done. so I was wondering if there's anything special I need to do when I replace the transfer belt cleaning blade and the less steps possible to replace it? I pulled the unit out and I believe on the left hand side of the unit there is two screws that I believe access the blade?



    This manual covers all localities where the products are sold. It may contain technical inaccuracies or typographical errors due to improvements or changes in products. Each chapter contains sections explaining the purpose of specific functions.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    Working...