IRC-4080 Copy quality

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • mramlawi
    replied
    Re: IRC-4080 Copy quality

    Remove the drum unit and make polish for the drum also cleaning the primary roller woth alcohol,and vacum all the toner rest,after that turn bk the drum to the machine and the remove the toner bottle ,and make around 20 copies full meganta color try test 5 on service mode after that u will get bk the drum in a great condition

    Leave a comment:


  • browny
    replied
    Re: IRC-4080 Copy quality

    Yes , some time I had problem like you have. Only put new drum in there ( after clean the IBT & VACCUM The Machine ) ... Good luck.

    Leave a comment:


  • jose antonio
    replied
    Re: IRC-4080 Copy quality

    Originally posted by browny
    hello Jose ,it looks like defective Magenta Drum leaking toner , take it out ,vacuum & clean IBT , Cleaning Blade then put new Magenta drum to that machine ,I think it will be fix .
    Hi Browny,

    Yes that's what i am afraid off, already removed the drum from the unit and vacuum cleaned inside the unit, but problem comes back.

    I guess i will have to order a new drum unit.. to bad, only has 50% of use.

    jose Antonio

    Leave a comment:


  • browny
    replied
    Re: IRC-4080 Copy quality

    hello Jose ,it looks like defective Magenta Drum leaking toner , take it out ,vacuum & clean IBT , Cleaning Blade then put new Magenta drum to that machine ,I think it will be fix .

    Leave a comment:


  • jose antonio
    started a topic IRC-4080 Copy quality

    IRC-4080 Copy quality

    Hi to all,

    Have e an copy quality issue when printing and coping, (see attachment.)

    If you look closely at the bottom part of the document you will see a light background magenta haze.

    Happens mostly on the lower part and is magenta only...drums are 50% and all toners are genuine.

    some times it goes away, but always comes back again after a few copies.

    Any help much appreciated,

    Jose Antonio
    Attached Files
Working...