Irca2225i remaing data

[mramlawi]

Re: Irca2225i remaing data

=====================================

Replace the SATA-Flash PCB on Main Controller 1

imageRUNNER ADVANCE C2225 / C2230 = FM0-2653-010

Thanks teckat and all i format the sata flash and it works

[teckat]

Re: Irca2225i remaing data

iR ADV C2020/C2030
v45.01.01 (SST)
v45.01.01 (USB Files)
v45.01.01 (LCDS Files)

-----------------------------05/22/2015

iR ADV C2225/C2230
v52.01.01 (SST)
v52.01.01 (USB Files)
v52.01.01 (LCDS Files)

[Canuck]

Re: Irca2225i remaing data

Read this

[teckat]

Re: Irca2225i remaing data

Thanka for ur response i tried to search on the parts catalog the code u gave it to me i didnt found it honestly

Part is not in Parts Catalog/


see pdf
Counter_Memory_&_SATA-Flash_PCB_Chart_2015.pdf

Do not transfer the following parts to another model (which has a different serial number).
If you fail to do so, the Main Body does not activate normally and this might cause to fail the restoration.
• Main Controller PCB 1
• Flash PCB


Transferring the parts from Old PCB to New PCB
• Flash PCB
• TPM PCB
Re-setting/registering the data is not necessary after Main Controller PCB 1 is replaced.

FLASH.jpg

[mramlawi]

Re: Irca2225i remaing data

=====================================

Replace the SATA-Flash PCB on Main Controller 1

imageRUNNER ADVANCE C2225 / C2230 = FM0-2653-010

Thanka for ur response i tried to search on the parts catalog the code u gave it to me i didnt found it honestly

[teckat]

Re: Irca2225i remaing data

Dear all,
i have canon irca2225i i installed it as a brand new machine since 1 month and now my client called me its not booting just giving on the screen remaing data dont turn of the machine ,i reinstalled all the conectors with no changes.

=====================================

Replace the SATA-Flash PCB on Main Controller 1

imageRUNNER ADVANCE C2225 / C2230 = FM0-2653-010

[mramlawi]

Re: Irca2225i remaing data

Have you reloaded the firmware?

No homestly not yet ,i will try ti reload software

[Tricky]

Re: Irca2225i remaing data

Have you reloaded the firmware?

[mramlawi]

Dear all,
i have canon irca2225i i installed it as a brand new machine since 1 month and now my client called me its not booting just giving on the screen remaing data dont turn of the machine ,i reinstalled all the conectors with no changes.