Good morning!
I must confess it's not very often that I need to service one of these. A coleague of mine was there and checked the usual stuff (inklevels and whatnot) and did the traditional procedure (printhead cleaning) without success.
I've read something about flushing the printheads - is this the equivalent of preparing a new machine when there's no ink in the tubes?
I'm going to skip through the manual now, but if anyone got any hints on this (it looks that there aren't many techs on this around this forum) they'd be much welcome!
Cheers!
I must confess it's not very often that I need to service one of these. A coleague of mine was there and checked the usual stuff (inklevels and whatnot) and did the traditional procedure (printhead cleaning) without success.
I've read something about flushing the printheads - is this the equivalent of preparing a new machine when there's no ink in the tubes?
I'm going to skip through the manual now, but if anyone got any hints on this (it looks that there aren't many techs on this around this forum) they'd be much welcome!
Cheers!