BizHub 601 finisher part needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • allan
    replied
    Re: BizHub 601 finisher part needed

    Leave the bad punch in to complete the paper path. Just disable it.

    Leave a comment:


  • copyman
    started a topic BizHub 601 finisher part needed

    BizHub 601 finisher part needed

    I need the guide plate that is removed when you install the punch kit in the FS-524/525 finisher (BizHub 601). I have to remove a bad punch unit and need that plate to put back in it's place.

    If anyone has it let me know and I will buy it.

    Thanks
Working...