Bizhub 601 false jams in finisher?

[Joe Foe from Buffalo]

Re: Bizhub 601 false jams in finisher?

In service mode counts jams as jams...at #3206 fixer/fuser

[allan]

Re: Bizhub 601 false jams in finisher?

Change out PS37 on the main body and PS1 on the finisher. Check that PS37 actuator falls back easily.

[Joe Foe from Buffalo]

Re: Bizhub 601 false jams in finisher?

looking for the part #'s of both asap..may need the parts catalog if someone wants to share or trade for one

[Joe Foe from Buffalo]

Re: Bizhub 601 false jams in finisher?

GRRR! What happen to the post showing a link to the parts catalog?

[allan]

Re: Bizhub 601 false jams in finisher?

looking for the part #'s of both asap..may need the parts catalog if someone wants to share or trade for one

Use State Conformation do the sensor check. Have you removed the side cover on the machine?

[Joe Foe from Buffalo]

Re: Bizhub 601 false jams in finisher?

yes I have done this. Some posts are missing...! Wondering why.