Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
Collapse
X
-
Tags: None
-
Re: Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
never heard of this model, but make sure the socket that the imaging unit plugs into has a good connection and is clean, the TCR sensor in the imaging unit may also be defective. (assuming its not in the bottom of the machine going through a window, then thats what i would be looking at too) After those are confirmed good i'd be considering printer control board personally.
are you sure the images are over toned and its not some other issue like a HV failure thats causing solid black pages etc and what is causing the low toner condition. -
Re: Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
never heard of this model, but make sure the socket that the imaging unit plugs into has a good connection and is clean, the TCR sensor in the imaging unit may also be defective. (assuming its not in the bottom of the machine going through a window, then thats what i would be looking at too) After those are confirmed good i'd be considering printer control board personally.
are you sure the images are over toned and its not some other issue like a HV failure thats causing solid black pages etc and what is causing the low toner condition.Comment
-
Comment
-
Re: Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
I would be interested to have a look at it,
it is an LED printer like the CF2002 and C350 ?
Got any print samples to upload ?Comment
-
Re: Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
I agree. It looks a lot like a C350 with a Sharp AR-FN7 finisher, but the toner cartridges are a little different. We had one of these as an office printer for a while, but we could not get it to talk to server 2012, so it wasn't very useful.
kyocera-mita-kmc2230.jpg
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
Damn. Haven't seen one of those in a long time. We used to have a lot of trouble with that toner feed assembly that the toner bottles fit into, especially the shutter that lets toner in. Have seen that code resolved by taking out, cleaning and repairing and reinstalling that unit. Sometimes had to replace the IU anyway. Pain in the you know what, but it might be worth a lookComment
-
Re: Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
I agree. It looks a lot like a C350 with a Sharp AR-FN7 finisher, but the toner cartridges are a little different. We had one of these as an office printer for a while, but we could not get it to talk to server 2012, so it wasn't very useful.
[ATTACH=CONFIG]31809[/ATTACH]
=^..^=
Sent from my Nexus 7 using TapatalkComment
-
Re: Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
Sorry for not getting back on this sooner. But the account was closed for a few weeks and I couldn't work on it.
Bottom line - out of toner. Put in a new toner bottle and no more code.
The empty black toner bottle was stuck in the toner hopper. The shutter was missing from the bottom of the toner bottle. So the toner dumped out of the toner bottle into the toner hopper. All the extra toner jammed the toner bottle release mechanism. What fun that was.
After getting the new toner bottle in, no more code.
I'm not sure why it didn't just ask for a new toner bottle to begin with.
Thank you to the guys for your input on this.Comment
-
Re: Konica Minolta CF2203 / Kyocera KM C2230 Error code C-0f36
We have a C353 with that finisher that has close to a million copies on and still going strong. It has been a great finisher.Comment
Comment