konica 750 not printing when pressing start

[W242]

Konica/bizhub 750 I put an original on the glass or doc feeder and press start and it will say printing, but nothing is happening. I can turn of the main switch for about 5 minutes then turn on and it will usually work again for awhile but goes back to same issue.
Any ideas what is causing this problem?

[Copier Addict]

Re: konica 750 not printing when pressing start

Clean the two sensors under the drum. This is a symptom of a dirty TCSB

[LASSSEN]

Re: konica 750 not printing when pressing start

Hi!
first we need more information about your engine as consumable life espicialy the drum and developer
what message is in the lcd

[W242]

Re: konica 750 not printing when pressing start

I cleaned the sensors and it seems to be working good now.

I never would have guessed that they could be related to the problem.

Thank you!

[Copier Addict]

Re: konica 750 not printing when pressing start

I cleaned the sensors and it seems to be working good now.

I never would have guessed that they could be related to the problem.

Thank you!

Thanks for letting us know that you got it fixed.