c6500 drum blade flipping

[BCR8TIVE]

Blade Flipping

I've "adjusted" the springs on the blades, over coated the blades, and angle cut the blades. That seems to work

[Si@danwood]

Fit a du102C !!!!Problem fixed, finito, no more, sorted, end of probs!!!!
Si

[StormyKnight]

Use 102C part number A0400Y4
Latest firmware permits increase toner being applied to the transfer belt, thus also lubricating the drums) irrelavent to the coverage. Before if the total coverage was over 40% no lubrication stripes where made, so if BK for example was over 40% coverage, none of the colours would get any lubrication. This was especially evident on larger runs.

[Keystone2]

Anyone have this? Have a fix?

What are the symptoms of a flipped blade? Our C500 is toning cyan across the top & bottom 17" edges & wonder if its a flipped blade? Thanks,

[StormyKnight]

Usually you get a drum rotation error with the related drum as the blade jams inself against the drum. If not an error, then the related drum colour will be very badly smeared across the whole page as the drum would be unable to clean itself between copies....

[ocetech88]

C6500 drum blade flips

At Oce UK we have experienced quite a few . We have started using the black drums from the newer version of the 6500 . We call it the CS665 so could be the Bizhub C6650 . Since fitting these drums we haven't had any as far as I am aware . The black drums fit and work fine in the 6500 in any position CMYK . Cheers .

[Si@danwood]

The KM model is the 5501/6501 and the product code for the drum is DU102C as mentioned previously in this post .These drums DO NOT flip the blades and if anything last longer than previous drums before causing feed direction banding issues..Si