more toner

[captkirk]

we have a bizhub c500 and are running a job that has 90% more black than color. the black cannot keep up. we ran it on the C500 because of the photos. What would be the correct procedure to tone up the black or to get it to add more black toner during the run.
It is a lot of black solids and photos.

[Albonline]

set dip switches in 25 mode to enable stabilization during print run.

[captkirk]

Thanks for you help

Are we talking about the
Image stabilization control
timing DIPSW24
*22 enabled ?

[Albonline]

yes. you can also run toner refresh in admin mode under expert adjust