Bizhub C252 Fuser Lamp replace

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • alejandro
    Technician
    • Mar 2008
    • 33

    #1

    Bizhub C252 Fuser Lamp replace

    Hello all,

    I just opened the fuser on this machine and one of the lamps is broken. Where can I order one of these lamps or is there any replacement that I can use, what would be the serial number to replace?

    thanks all for your help.
  • dogsbody
    Trusted Tech

    250+ Posts
    • Jun 2007
    • 289

    #2
    can't get em, mate. we have had several lamps fail and just have to replace the fuser.
    if anyone can get them i would like to know.
    cheers
    The force will be with you always.

    Comment

    • alejandro
      Technician
      • Mar 2008
      • 33

      #3
      I am doing the research about replacement lapms. I will post when I find out.

      thanks

      Comment

      • kmcopytech
        Trusted Tech

        100+ Posts
        • Dec 2007
        • 141

        #4
        This alone can replace the lamps,

        Read the C252 Parts manual..

        Comment

        • Haroldbfix
          Trusted Tech

          100+ Posts
          • Feb 2008
          • 212

          #5
          Originally posted by dogsbody
          can't get em, mate. we have had several lamps fail and just have to replace the fuser.
          if anyone can get them i would like to know.
          cheers
          Yep!! whole unit.

          Comment

          • alejandro
            Technician
            • Mar 2008
            • 33

            #6
            I dont see to find the lamp on the Lamp manufacture (USHIO) website. Ill keep trying,
            I have a feeling that is possible to do this.

            Comment

            • ni311
              Senior Tech

              Site Contributor
              500+ Posts
              • May 2008
              • 658

              #7
              KM it is not supplying lamps alone, from their point of view you have to change the whole fusing unit. You might find a lamp that match the length, watts and connectors with the old one or you might get one from an old fusing unit.
              Konica Minolta Error Codes - Explanations and Solutions

              Comment

              • DadO
                Trusted Tech

                Site Contributor
                250+ Posts
                • Dec 2007
                • 401

                #8
                U will waste ur days, life, hair....till u find it....trust me

                Comment

                • bigmark
                  Technician
                  • Sep 2008
                  • 39

                  #9
                  even if you do find a lamp that will fit, good luck getting the fuser apart, and then getting it back together again with out breaking anything. have seen many people try, and nobody has ever succeeded.

                  Comment

                  • alejandro
                    Technician
                    • Mar 2008
                    • 33

                    #10
                    Im still looking for the lamp. no luck yet. Im down in the dominican republic and there are places where they fix pretty much anything electronic, and there are a lot of chinese parts and stuff like that. Im hoping I can get a look a like lamp.

                    anyway, this could be a project for me to waste time. Can anybody recommend a good place to buy the fuser for this machine? cheap?

                    thanks

                    Comment

                    Working...