Interchangeability of finishing options between models??

[TandBPrinting]

Hi guys,

We currently have a KM 1050, a KM C6500, KM C7000 and a KM 951. We are ready to retire the 1050 and it's really not worth much money but I've heard that we can take the SD-501 perfect binder or the FS-503 stapler or FD-501 Folder off it and install them on other machines....specifically the 951. I was told by a independent parts guy that he believed it only required a firmware upgrade?

Is this true?

Thanks in advance.

Chris Barton
T and B Printing

[Synthohol]

Re: Interchangeability of finishing options between models??

heres the matrix.
some accessories require moving a loop connector when going from color to mono so be careful.

[TandBPrinting]

Re: Interchangeability of finishing options between models??

Great info, thanks!!!!!!


Chris